|
Specifications
* Cree 7090 XR-E LED. WC R2 LED
* Step up and down constant current driver, with high efficiency dual mode DC-DC regulator (PWM / PFM) and circuit to protect Li-ion battery from over-discharging. Working voltage is 2.75V to 8.5V, under the circuit will flicker to remind users to replace battery.
* High output: 1A at 260 Lumens for 3.5 hours
* Function: multifunctional circuit with advanced Mini computer chip, and it can set according to customers’ variety requirement
* 53 mm diameter x 50 mm deep reflector provides greater efficient illumination over longer distances than the standard with similar power
* Support battery sizes Two 3.0V CR123A batteries or one 18650 Li-ion battery
* Type-III hard anodize high quality aerospace grade T7075 aluminium construction
* Switch: Tactical forward clicky switch
* Waterproof Capability: IPX-8 standard
* Toughened ultra clear glass lens with AR coating
* Weight: 230 g
* Length: 175mm Head diameter: 57mm Housing Diameter: 34mm
TIABLO Unique Design Characters:
1 Special purpose flashlight for hunting, searching and explore.
2 Unique body designs with perfect handle.
3 National standard brass copper pipe inserted in the body makes it elegance and exalted
4 The high difficulty of process on the rear of lamp is much beneficial to imitate-proof.
5 It can be used by headstand. For example, in a space of 30sq.m, headstand TIABLO can make the same irradiation as a 25W daylight lamp.
6 Military grade and hard anodized finish in black color is much wearable.
7 Infinitely Variable Brightness System suitable for various distance lighting requirements.
8 Multifunctional circuit
9 Double circuit design with high-efficient electricity driver and multifunctional setting of birghtness adjustment.
10 With premium stripe for present
The combined circuit used for user-defined and multifunctional brightness adjustment.
Two modes of operation: A & B
A mode.
Mode A is Infinite Brightness Setting recycle. Brightness goes from 1% to 100% gradually ，and continue from 100% to 1%（not traditional way that brightness goes from 1% to 100% and then repeat from 1% to 100%）That is to say, brightness goes from 1%-------50%-----100%---50%----1%. During this process, the light flicker once at 1%output，flicker twice at 50%output，and flicker three times at 100%output.
Mode B is multi-functional selecting：
Mode B includes 1、Strobe 2、SOS，3 Standby reminder 4、Showing off features
Details：1、10HZ strobe (finish within 2 seconds)
2、SOS
3、stand by indicator: flicker once every 2 seconds with 10% brightness（finish within 2 seconds）
4.Showing off features ：an Infinite Brightness Setting recycle 1%--100%---1%（finish within 5seconds，no flicker），second time recycle will finish within 4 seconds, then next recycle finish within 3seconds, finish within 2 seconds, finish within 1 seconds, then turn into 15 HZ strobe，Goes from 15HZ to 1HZ（finish within 5seconds）, turn into SOS，after two recycles, turn into flickering twice within 1 seconds, then finish.
User Instruction for shifting up/down between mode A and mode B.
Before using Mode A and B, need to activate them as following:
When the light is under Mode A, press the tail cap for more than 3 seconds, will activate Infinite Brightness Setting in Mode A, switch the light off at any brightness you need, will save it automatically.
When the light is under Mode B，press the tail cap for more than 3 seconds, will activate all the features in Mode B. The light will go from feature 1st to 5th, users can turn off the light at N（N stands for any of the five features , 1\2\3\4\），and the feature of N will be memorized as the Mode B.
Switch on the light again，the light goes from Mode A to features of N in Mode B and off.
|
